Product description
Adapter pieces (couplings & adapters) are elements in water-supply systems used for:
- Connecting valves and armatures to pipes
- Connecting two pipes together
- Repairing damaged pipes in order to reduce losses
- Facilitating the installation and dismantling of cut-off or metering elements
All PAM connecting/adapter pieces have a 250 μm epoxy coating.
Pipelines are usually made from different pipe materials: cast iron, steel, PEHD, ductile iron, PVC, and asbestos.
There are several solutions available (depending on the material and dimensions).
UltraLINK
- Wide-range tolerance coupling for various pipe materials (cast iron, ductile iron, and steel pipes and PVC tubes)
- For outer diameters from DN50 / d49 to DN300 / d348 w/o discontinuity
- Pressures up to max. 16 bar
- large angle flexure ± 6° per joint (12° per coupling or between two pipes)
LINK GS
- Dedicated coupling for ductile iron pipes
- DN40 - DN100 up to 40 bar
DN125 - DN300 up to 25 bar
DN350 - DN600 up to 16 bar - for large sizes DN 350 – DN 1000 up to 16 bar
LINK PE
- Anchor-type coupling for PE tubes
- 16 bar; from DN50 / d63 to DN250 / d280
10 bar; from DN300 / d315
FixLINK
- Dedicated anchor-type coupling for ductile iron pipes
- DN 60 - DN 250 up to 16 bar
DN 300 up to 10 bar - For smaller dimensions: fastening with screws only on one side for easy installation in small or tight spaces (chambers or underground installation)
- Enables mounting onto two pipes or pipe connection at the valve
FixLINK PVC-PE
- Anchor-type coupling for PVC or PE tubes
DN50 / d63 - DN250 / d280 up to 16 bar.
- In combination with PE-80 and PE-100 tubes, 10 or 16 bar
- Reinforcing rings for PE tubes are recommended.
